Illustrative low-rise commercial exterior
SERVICES / COMMERCIAL LOW-RISE

Drone cleaning for low-rise commercial properties

Altitude Robotics cleans exterior glass, façades and cladding for low-rise properties with less access setup and a digital record of the completed work.

Illustrative property image · Video to be supplied

The incumbent

Scaffold, boom lifts and manual squeegee work can cost more than the façade warrants.

For owners and FMs, low-rise cleaning still brings access equipment, blocked frontage and tenant coordination. The goal is to remove the access overhead where the site suits drone cleaning.

The Altitude approach

Reference photograph showing a drone cleaning an exterior wall
Reference cleaning image · Lucid Bots

Clean the elevation without building a large access setup around it.

  • Less mobilisation

    No scaffold or elevated platform is required for suitable drone-cleaned areas.

  • Keep the property moving

    Cleaning is phased around entrances, customers, tenants and deliveries.

  • Document the result

    Each job can hand back before / after imagery, coverage and condition notes.

Side-by-side

MetricScaffold / lift / manual accessAltitude Robotics
Access methodScaffold / boom lift / rope access / manual squeegeeGround-operated cleaning drone
Cost per m²Access equipment + labour priced into the jobSite-priced after survey; reduced access setup on suitable areas
MobilisationScaffold/lift positioning or rope setupGround system + controlled work zone
Building downtimeAccess equipment can block frontage and walkwaysActive zone managed around tenants, customers and entrances
People at heightPersonnel work from elevated access0 for areas cleaned by drone

We only publish operating numbers we can validate. Cost per m², site duration and weather limits are confirmed in the quotation after survey.

Typical properties

Illustrative retail property
Retail & F&B properties
Illustrative low-rise office
Low-rise offices
Illustrative podium and mixed-use property
Podiums & mixed-use blocks
SCOPE

What is included

  • Surfaces: exterior glazing, compatible façades, awnings, podium walls and cladding.
  • Soiling: dust, traffic film, bird residue and light organic buildup.
  • Included: site plan, cleaning zones, surface-appropriate rinse and visual QA.
OPERATING LIMITS

What we will not force

  • Narrow setbacks, trees, wires, signage and public-road interfaces can make a façade unsuitable for drone access.
  • Public areas need a controlled exclusion zone; we do not operate through uncontrolled pedestrian traffic.
  • Unsafe weather or surfaces incompatible with water / spray pressure are excluded.
  • Standoff, pressure and usable reach are confirmed after site survey rather than assumed from building height.
PROCESS

From survey to handover

01

Survey frontage, façade, pedestrian flow and access constraints.

02

Confirm method, surface compatibility and cleaning zones.

03

Prepare flight / site permissions and tenant or public-area controls.

04

Clean section by section with ground supervision.

05

QA review and digital handover.

DELIVERABLE

A clean plus a usable site record.

  • Before / after imagery
  • Coverage map by frontage / elevation
  • Condition observations for the property team

Common questions

Will the property need to close?

Usually not. We control the active work zone and coordinate it around entrances and operating hours.

Can you clean coated glass?

We check the coating and manufacturer guidance before choosing the method.

Is every low-rise site suitable?

No. Trees, wires, narrow setbacks, public traffic and surface condition can make conventional access the better method.

Get a quote now!

Send your property details and frontage constraints for an assessment and quotation.

Get a quote now!